Pulley Removal & Installation Tool
2003-2004 Cobra, 1999-2004 Lightning, and 2007-2014 GT500
(Small Horseshoe Shown in Images is Optional - Please See Note 3 Below)
This high-quality tool kit can be configured to remove a supercharger pulley and to install a supercharger pulley. It is precision-machined from the highest quality materials and is designed to be re-used many times.
The kit is designed specifically for use on the factory-supercharged modular applications, and is designed so that the supercharger will not be scratched or damaged in any way when the tool is used. Illustrated instructions are included.
Note 1: Due to the extremely tight interference fit of the factory supercharger pulley in the GT500 application and the weak design of the pulley itself, the factory pulley is often damaged upon removal. Metco Motorsports offers a stock-sized 3.00" diameter two-piece supercharger pulley for the GT500 in case the owner later wishes to return to the stock boost level.
Note 2: Due to clearance issues, a Metco Motorsports supercharger pulley hub cannot be removed from the Shelby GT500 using this pulley tool. A dedicated GT500 hub removal tool is available from Metco Motorsports under PN MPT0002.
Note 3: The optional hub-removal horseshoe is offered for Cobra & Lightning applications previously equipped with a Metco two-piece supercharger pulley. This smaller horseshoe bolts to the main horseshoe using the provided hardware, and will allow this pulley tool to remove a Metco Motorsports steel pulley hub already installed on a supercharger shaft. Because of the very specific purpose, this extra horseshoe is optional and not included (although shown in the image above) when the tool ships in the standard configuration. It is only used to remove a Metco pulley hub from a Lightning or Cobra.