Interchangeable Crank Pulley Kit
2016 & Newer Cadillac CTS-V, 2017 & Newer ZL1
This crank pulley kit is based on the Innovator's West replacement balancer assembly for the GM LT4 engine, PN 8410. This kit represents a clean and simple way to add boost and horsepower to your supercharged Cadillac or ZL1 Camaro without making any permanent modifications.
The Innovator's West balancer is precision-machined in the USA and installs directly in place of the cast factory unit. The SFI-approved IW balancer and crank ring assembly weighs only 12.6 lbs, compared to 16.2 lbs for the factory steel unit. Installation of this kit removes significant rotating mass from the front of the engine, and it adds the proven wet clutch harmonics-dampening technology that makes Innovators West the premier balancer in motorsports.
Our CNC-machined crank pulley rings bolt directly to the new balancer using the provided fasteners. Once the balancer assembly is installed, changing the outer ring to adjust the boost level is simply a matter of six the allen-head fasteners. Crank pulley rings are also available separately and are listed elsewhere in this section.
The Super Duty Hub Upgrade is generally recommended for
vehicles making 900HP or more. It
includes a heavy-duty steel hub that mates with the crankshaft snout (where the
load is highest), and this hub is machined from a higher grade of steel and is larger
in size. A new seal is included with the
SD balancers for use in the front cover to accommodate the larger hub.
There is no downside to using a SD hub balancer other
than the slight difference in cost.
Note 1: In the LT4 application, it is not necessary to change or relocate idler pulleys to fit crank pulley rings as large as 10.5". In select ZL1 applications, rings sized 9.55" and larger may interfere with the front sway bar.
The 9.10" kit requires the 080842HD belt. The 9.55" kit uses the K080850HD belt, and the 10.0" kit uses the K080865 belt. Remaining belt data will be added here once compiled, but is currently available elsewhere on the internet.
Note 2: Most of the crank pulley rings can be purchased in a 10-rib configuration for custom applications. Please call for details on availability and pricing.
This kit does not fit the 2015 and newer Corvette Z06.
Part Numbers: ICPLT4-V4, ICPLT4-V6, ICPLT4-V8, ICPLT4-V10, ICPLT4-V12